Observation |
Possible Causes |
Remedy |
Weak stimulation or no stimulation even at max amplitude setting. |
Improper control settings
|
Set controls to those prescribed by your clinician
|
Poor electrode contact or dry electrode. |
Hydrate or change the electrodes |
Electrodes not applied properly |
Check electrode location or positioning |
Electrode conduction is low |
Change electrodes |
Lights are on but no stimulation or stimulation out of only one channel |
Lead wire is broken |
Swap lead wires or change lead wires |
Skin Irritation at electrode placement site |
Allergic to electrode |
Change the electrode or call clinician |
Unit doesn’t switch ON or light is dim |
Battery deeply discharged |
Change battery |